Standard features

• This building is made from responsibly sourced high quality redwood, we do not use whitewood, chipboard, plywood or any other sheet material.
• Fully tongue and grooved construction
• Roof canopy 305mm (1′)
• 4 x Front and side leaded fixed windows
• Central, stable ledge and braced door
• Door hinges can be either left or right hand side, just mention in the notes box when ordering
• Rim lock and handle set
• Can be supplied without windows, just mention in the notes box when ordering
• Can be supplied painted for an additional cost
• Can be supplied with a veranda for an additional cost
• Can be customised to suit your requirements

Specification

• Eaves height 1680mm
• Ridge height on:
  • 6′ Gable 2160mm
  • 7′ Gable 2270mm
  • 8′ Gable 2280mm
  • 10′ Gable 2370mm
• Door 1765 x 762mm
• Windows 610 x 457mm per pane
• Framing up to 10′ Gable 38 x 50mm
• Framing for 12′ Gable 50 x 50mm
• Cladding 16 x 125mm tongue & groove shiplap (12mm finish)
• All timber sizes are nominal before machining unless stated otherwise
• All measurements quoted are internal eaves and ridge heights
• Quoted height measurements do not include the roof and floor
• Allowances should be made for the roof overhang in all directions when locating your building in a confined space

The building comes complete and includes:

• VAT
• Treatment Inside & out
• Tongue & groove floor and roof
• Toughened glass
• Green mineral roofing felt
• All the nails & screws
• Lock & key

Sizes available
From: 1.5m x 2.1m (5′ x 7′) to 2.4m x 3.0m (8′ x 10′)

Optional Extras
A wide range of optional extras can be added to this building to suit your needs, please look under the custom build & optional extra tab for the complete list.

Installation
Our installation prices displayed are base prices and may be subject to change. Please read more about installations by going to our Installation Service page.