Standard features

• This building is made from responsibly sourced high quality redwood, we do not use whitewood, chipboard, plywood or any other sheet material. 
• Fully tongue and grooved construction
• 3″ x 2″ Framed roof
• Additional height
• Framing placed at 300mm (1′) intervals throughout for increased strength and security
• Diagonal bracing in ends for extra strength
• Full range of door positions A – Z
• 50 x 50mm Fully framed, Ledge and braced door
• Galvanised bolted on hinges
• Door hinges can be either left or right hand side, just mention in the notes box when ordering
• Security bolted padbolt protector
• Internally glazed security window
• Can be supplied without windows, just mention in the notes box when ordering
• Can be supplied painted for an additional cost
• Can be customised to suit your requirements

Specification

• Eaves height 1937mm
• Ridge height 2153mm
• Door 1880 x 762mm
• Windows 1220 x 150mm
• Framing 38 x 50mm throughout
• Cladding 16 x 125mm tongue & groove shiplap (12mm finish)
• All timber sizes are nominal before machining unless stated otherwise
• All measurements quoted are internal eaves and ridge heights
• Measurements are approximate and can change without prior notice
• Quoted height measurements do not include the roof and floor
• Allowances should be made for the roof overhang in all directions when locating your building in a confined space

The building comes complete and includes:

• VAT
• Treatment Inside & out
• Tongue & groove floor and roof
• Toughened glass
• Green mineral roofing felt
• All the nails & screws
• Padbolt protector

Sizes available
From: 1.2m x 1.2m (4′ x 4′) to 3.6m x 2.4m (12′ x 8′)

Optional Extras
A wide range of optional extras can be added to this building to suit your needs, please look under the custom build & optional extra tab for the complete list.

Installation
Our installation prices displayed are base prices and may be subject to change. Please read more about installations by going to our Installation Service page.