Standard features

• This building is made from responsibly sourced high quality redwood, we do not use whitewood, chipboard, plywood or any other sheet material. 
• Fully tongue and grooved construction
• 4′ x 6′ Kennel unit with a floor and access door with closing bob hole
• 6′ x 6′ Run with 50 x 50mm galvanised weldmesh on 50 x 50mm framing, with a front access door
• Run designed with a bottom drainage for easy cleaning
• Ledge and braced doors
• Door hinges can be either left or right hand side
• Sliding bolt
• Can be supplied painted for an additional cost
• Can be customised to suit your requirements

Specification

• Eaves height on kennel 1780mm
• Eaves height on run 1832mm
• Ridge height on kennel 2250mm
• Ridge height on run  2305mm
• Door in run 1757 x 600mm
• Door in kennel 1765 x 604mm
• Windows 610 x 457mm per pane
• Framing 50 x 50mm throughout
• Cladding 16 x 125mm tongue & groove shiplap (12mm finish)
• All timber sizes are nominal before machining unless stated otherwise
• All measurements quoted are internal eaves and ridge height
• Quoted height measurements do not include the roof and floor
• Allowances should be made for the roof overhang in all directions when locating your building in a confined space

The building comes complete and includes:

• VAT
• Treatment Inside & out
• Tongue & groove floor and roof
• Green mineral roofing felt
• All the nails & screws
• Sliding bolt

Sizes available
3.0m x 1.8m (10’x 6′)